Digital Fiber Sensor FX-500 Panasonic
When the FX-500 series is used together with our super quality fiber, the incident light intensity variation among units is decreased to only 1/4 of that of conventional models.
By being close to absolute values instead of modified digital values, changes in detection that could not be found in the past can now be monitored.
Order guide
Amplifiers
Quick-connection cable is not supplied with FX-501(P) and FX-502(P). Please order it separately.
| Type | Appearance | Model No. | Emitting element |
Output | External input |
|---|---|---|---|---|---|
| Standard type |
 |
FX-501 | Red LED | NPN open-collector transistor | – |
| FX-501P | PNP open-collector transistor | ||||
| 2-output type |
FX-502 | NPN open-collector transistor 2 outputs | Incorporated (Switchable with Output 2) |
||
| FX-502P | PNP open-collector transistor 2 outputs | ||||
| Cable type |
 |
FX-505-C2 | NPN open-collector transistor 2 outputs analog output | Incorporated | |
| FX-505P-C2 | PNP open-collector transistor 2 outputs analog output |
Quick-connection cables for FX-501(P)
Quick-connection cable is not supplied with the amplifier. Please order it separately.
| Type | Model No. | Description | |
|---|---|---|---|
| Main cable (3-core) |
CN-73-C1 | Length: 1 m 3.281 ft | 0.2 mm2 3-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in |
| CN-73-C2 | Length: 2 m 6.562 ft | ||
| CN-73-C5 | Length: 5 m 16.404 ft | ||
| Sub cable (1-core) |
CN-71-C1 | Length: 1 m 3.281 ft | 0.2 mm2 1-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in |
| CN-71-C2 | Length: 2 m 6.562 ft | ||
| CN-71-C5 | Length: 5 m 16.404 ft | ||
| (Note): | The material of Quick-connection cable will be changed from production in March 2013, as soon as the previous ones are shipped out. ・Conductor cross-sectional area has been changed from 0.15mm2 to 0.2mm2. ・Sheath diameter has been changed from ø3.0mm to ø3.3mm. |
|---|
|
|
Quick-connection cables for FX-502(P)
Quick-connection cable is not supplied with the amplifier. Please order it separately.
| Type | Model No. | Description | |
|---|---|---|---|
| Main cable (4-core) |
CN-74-C1 | Length: 1 m 3.281 ft | 0.2 mm2 4-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in |
| CN-74-C2 | Length: 2 m 6.562 ft | ||
| CN-74-C5 | Length: 5 m 16.404 ft | ||
| Sub cable (2-core) |
CN-72-C1 | Length: 1 m 3.281 ft | 0.2 mm2 2-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in |
| CN-72-C2 | Length: 2 m 6.562 ft | ||
| CN-72-C5 | Length: 5 m 16.404 ft | ||
| (Note): | The material of Quick-connection cable will be changed from production in March 2013, as soon as the previous ones are shipped out. ・Conductor cross-sectional area has been changed from 0.15mm2 to 0.2mm2. ・Sheath diameter has been changed from ø3.0mm to ø3.3mm. |
|---|
|
|
End plates
End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.
| Appearance | Model No. | Description |
|---|---|---|
 |
MS-DIN-E | When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. [2 pcs. per set] |
Đánh giá
Chưa có đánh giá nào.
Hãy là người đầu tiên nhận xét “Digital Fiber Sensor FX-500 Panasonic”