Filter Regulator AW10-A to AW40-A, (SMC)
・Easy element replacement
The element and the bowl are integrated.
Replacement can be done in hand.
・Energy-saving regulator Pressure drop: Max. 50% improvement
・Reduced required maintenance space: Max. 46% reduction
・Better visibility & increased safety
The bowl is covered with a transparent bowl guard.
SMC’S series AW-A is a combination filter/regulator, minimizing space and piping by integrating two units into one. The pressure drop across the regulator section has been reduced creating a more efficient unit with a maximum set pressure of 100 psi. The element and bowl on the AW-A series is now one-piece, making element replacement easier. Bowls on the size 30 and 40 are covered with a transparent bowl guard, completely protecting them from the environment and making the interior contents visible from 360 degrees. This series is part of the family of modular air preparation units and can be combined with other similar sized products. The new AW-A is available in four body sizes with piping from M5 to 3/4″ in Rc, NPT, and G thread types.
| Series | Port size | Set pressure (MPa) | Filtration (μm) |
|---|---|---|---|
| AW10 to 40-A | M5，1/8，1/4，3/8，1/2，3/4 | 0.05 to 0.7 0.02 to 0.2 |
5 |
Đánh giá
Chưa có đánh giá nào.
Hãy là người đầu tiên nhận xét “Filter Regulator AW10-A to AW40-A, (SMC)”