Safety Light Curtain Type 2 SF2B (Panasonic)

Type 2 safety solution
International regulations for safety measures at reasonable cost

In using the safety light curtain, please establish a control system to satisfy the below items in order to ensure safety with a total system.

Mô tả
Đánh giá (0)

Order guide

PRODUCT CONFIGURATION

[1]. Safety Light curtains

Mounting bracket and bottom cap cable are not supplied with the safety light curtain. Be sure to order them separately.

Hand protection type

Min. sensing object ø27 mm ø1.063 in (20 mm 0.787 in beam pitch)

Appearance	Operating range (Note 1)	Model No. (Note 4)		Number of beam channels	Protective height (mm in)
Appearance	Operating range (Note 1)	NPN output type	PNP output type	Number of beam channels	Protective height (mm in)
	0.2 to 13 m 0.656 to 42.651 ft [When using the adapter cable SF2B-CB05-B:0.2 to 5 m 0.656 to 16.404 ft]	SF2B-H8-N (Note 2)	SF2B-H8-P (Note 2)	8	168 6.614
		SF2B-H12-N	SF2B-H12-P	12	232 9.134
		SF2B-H16-N	SF2B-H16-P	16	312 12.283
		SF2B-H20-N	SF2B-H20-P	20	392 15.433
		SF2B-H24-N	SF2B-H24-P	24	472 18.583
		SF2B-H28-N	SF2B-H28-P	28	552 21.732
		SF2B-H32-N	SF2B-H32-P	32	632 24.882
		SF2B-H36-N	SF2B-H36-P	36	712 28.031
		SF2B-H40-N	SF2B-H40-P	40	792 31.181
		SF2B-H48-N	SF2B-H48-P	48	952 37.480
		SF2B-H56-N	SF2B-H56-P	56	1,112 43.779
		SF2B-H64-N	SF2B-H64-P	64	1,272 50.079
		SF2B-H72-N	SF2B-H72-P	72	1,432 56.378
		SF2B-H80-N	SF2B-H80-P	80	1,592 62.677
		SF2B-H88-N	SF2B-H88-P	88	1,752 68.976
		SF2B-H96-N	SF2B-H96-P	96	1,912 75.275

Arm / Foot protection type

Min. sensing object ø47 mm ø1.850 in (40 mm 1.575 in beam pitch)

Appearance	Operating range (Note 1)	Model No. (Note 4)		Number of beam channels	Protective height (mm in)
Appearance	Operating range (Note 1)	NPN output type	PNP output type	Number of beam channels	Protective height (mm in)
	0.2 to 13 m 0.656 to 42.651 ft [When using the adapter cable SF2B-CB05-B:0.2 to 5 m 0.656 to 16.404 ft]	SF2B-A4-N (Note 2)	SF2B-A4-P (Note 2)	4	168 6.614
		SF2B-A6-N	SF2B-A6-P	6	232 9.134
		SF2B-A8-N	SF2B-A8-P	8	312 12.283
		SF2B-A10-N	SF2B-A10-P	10	392 15.433
		SF2B-A12-N	SF2B-A12-P	12	472 18.583
		SF2B-A14-N	SF2B-A14-P	14	552 21.732
		SF2B-A16-N	SF2B-A16-P	16	632 24.882
		SF2B-A18-N	SF2B-A18-P	18	712 28.031
		SF2B-A20-N	SF2B-A20-P	20	792 31.181
		SF2B-A24-N	SF2B-A24-P	24	952 37.480
		SF2B-A28-N	SF2B-A28-P	28	1,112 43.779
		SF2B-A32-N	SF2B-A32-P	32	1,272 50.079
		SF2B-A36-N	SF2B-A36-P	36	1,432 56.378
		SF2B-A40-N	SF2B-A40-P	40	1,592 62.677
		SF2B-A44-N	SF2B-A44-P	44	1,752 68.976
		SF2B-A48-N	SF2B-A48-P	48	1,912 75.275

Note:

1)	The “operating range” is the possible setting distance between the emitter and the receiver.
2)	The SF2B-H8-□ and SF2B-A4-□ cannot be connected in series because they do not include a connector for series connection.
3)	The distance between the tip of the safety light curtain and the last beam axis of the SF2B-H8-□ and SF2B-A4-□ is 22 mm 0.866 in.
4)	Models which have an “E” symbol in the model No. on the name plate are emitters, and those with a “D” symbol are receivers.

[2]. Mounting brackets

Mounting bracket is not supplied with the safety light curtain. Be sure to order it separately.

Designation			Model No.	Description
Standard mounting bracket			MS-SF2B-1	Used to mount the safety light curtain on the rear surface and side surface (4 pcs. per set for emitter and receiver)
Dead zoneless mounting bracket			MS-SF2B-3	Mounting of the safety light curtain is possible so that the mounting bracket does not project past the protective height (safety light curtain length). (4 pcs. per set for emitter and receiver)
Adapter mounting brackets	For SF2-A / SF2-N	For rear and side mounting	MS-SF2B-5	Used when replacing units in the SF2-A / SF2-N series.(discontinude mode) (4 pcs. per set for emitter and receiver)
	For SF1-N / NA40	For rear mounting	MS-SF2B-4	Used when replacing units in the SF1-N(discontinude mode) / NA40 series which are using the MS-SF1-1 / MS-NA40-1 sensor mounting brackets.(Note) (4 pcs. per set for emitter and receiver)
	For NA40	For side mounting	MS-SF2B-6	Used when replacing units in the NA40 series which are side mounted (direct mounted).(Note) (4 pcs. per set for emitter and receiver)
	For SF1-N	For side mounting	MS-SF2B-7	Used when replacing units in the SF1-N series (discontinude mode) which are side mounted (discontinude mode) . (4 pcs. per set for emitter and receiver)

Note:	SF1-N-compatible mounting bracket can also be used for SF1-S / SF1-A series products that are discontinued. The NA40-compatible mounting bracket can also be used for NA40-S / NA40-B series products that are discontinued.

Standard mounting bracket

MS-SF2B-1

Four bracket set [M3 (length 5 mm 0.197 in) hexagon-socket-head bolts are attached. (8 pcs. for safety light curtain mounting; 8 pcs. for beam axis adjustment)]

MS-SF2B-3

Four bracket set [Six spacers for the intermediate supporting bracket and twelve M5 (length 8 mm 0.315 in) hexagon-socket-head bolts are attached.]

MS-SF2B-5

Four bracket set [M3 (length 5 mm 0.197 in) hexagon-socket-head bolts are attached. (8 pcs. for safety light curtain mounting; 8 pcs. for beam axis adjustment)]

MS-SF2B-4

Four bracket set [Eight M3 (length 5 mm 0.197 in) hexagon-sockethead bolts are attached.]

MS-SF2B-6

Four bracket set [Eight M3 (length 5 mm 0.197 in) hexagon-sokethead bolts are attached.]

MS-SF2B-7

Four bracket set [Eight M3 (length 5 mm 0.197 in) hexagon-sokethead bolts are attached.]

[3]. [4]. [5]. Mating cable / Extension cable / Cables for series connection

Mating cable is not supplied with the safety light curtain. Be sure to order it separately.

[3]Bottom cap cable

Type		Model No.	Description
8-core cable	Discrete wire	SF2B-CCB3	Cable length: 3 m 9.843 ft Net weight: 370 g approx. (2 cables)	Used for connecting to the safety light curtain and to other cables or the SF-C13 control unit. Two cables per set for emitter and receiver Cable outer diameter: ø6 mm ø0.236 in Cable color: Gray (for emitter) Gray with black line (for receiver) The min. bending radius: R6 mm R0.236 in
		SF2B-CCB7	Cable length: 7 m 22.966 ft Net weight: 820 g approx. (2 cables)
		SF2B-CCB10	Cable length: 10 m 32.808 ft Net weight: 1,160 g approx. (2 cables)
		SF2B-CCB15	Cable length: 15 m 49.213 ft Net weight: 1,720 g approx. (2 cables)
	Connector	SF2B-CB05	Cable length: 0.5 m 1.640 ft Net weight: 95 g approx. (2 cables)	Used for connecting to the safety light curtain and to an extension cable or the SF-C11 control unit. Two cables per set for emitter and receiver Cable outer diameter: ø6 mm ø0.236 in Connector outer diameter: ø14 mm ø0.551 inmax. Cable color: Gray (for emitter), Gray with black line (for receiver) Connector color: Gray (for emitter), Black (for receiver) The min. bending radius: R6 mm R0.236 in
		SF2B-CB5	Cable length: 5 m 16.404 ft Net weight: 620 g approx. (2 cables)
		SF2B-CB10	Cable length: 10 m 32.808 ft Net weight: 1,200 g approx. (2 cables)

[4]Extension cable

Type			Model No.	Description
8-core cable	Discrete wire		SFB-CC3	Cable length: 3 m 9.843 ft Net weight: 380 g approx. (2 cables)	Used for cable extension or connecting to the SF-C13 control unit. Two cables per set for emitter and receiver Cable outer diameter: ø6 mm ø0.236 in Connector outer diameter: ø14 mm ø0.551 in max. Cable color: Gray (for emitter), Gray with black line (for receiver) The min. bending radius: R6 mm R0.236 in
	Discrete wire		SFB-CC10	Cable length: 10 m 32.808 ft Net weight: 1,200 g approx. (2 cables)
	With connectors on both ends	For emitter	SFB-CCJ10E	Cable length: 10 m 32.808 ft Net weight: 580 g approx. (1 cable)	Used for cable extension or connecting to the SF-C11 control unit. One each for emitter and receiver Cable outer diameter: ø6 mm ø0.236 in Connector outer diameter: ø14 mm ø0.551 in max. Cable color: Gray (for emitter), Gray with black line (for receiver) Connector color: Gray (for emitter), Black (for receiver) The min. bending radius: R6 mm R0.236 in
	With connectors on both ends	For receiver	SFB-CCJ10D	Cable length: 10 m 32.808 ft Net weight: 600 g approx. (1 cable)

[5]Cable for series connection

Appearance	Model No.	Description
* Used in conjunction with sub-sensor for serial connection only.	SF2B-CSL01	Cable length: 0.1 m 0.328 ft Net weight: 70 g approx. (2 cables)	Use when connecting the sub-sensor for series connection to the safety light curtain in series. Two cables per set for emitter and receiver (common for emitter and receiver) Cable outer diameter: ø6 mm ø0.236 in Cable color: Gray (common for emitter and receiver) The min. bending radius: R6 mm R0.236 in
	SF2B-CSL05	Cable length: 0.5 m 1.640 ft Net weight: 120 g approx. (2 cables)

^*[3]Adapter cable (Bottom cap cable)

Type			Appearance	Model No.	Description
8-core cable	For SF2-A / SF2-N		* Please contact our office for wiring of adapter cables.	SF2B-CB05-A	Cable length: 0.5 m 1.640 ft Net weight: 95 g approx. (2 cables)	Used when replacing units in the SF2-A / SF2-N series(discontinude mode). The SF2N-CC□ cable with connector can be used without change, so that replacement with SF2B series units can be done smoothly. Two cables per set for emitter and receiver Cable outer diameter: ø6 mm ø0.236 in Connector outer diameter: ø14 mm ø0.551 in max. Cable color: Gray (for emitter), Gray with black line (for receiver) Connector color: Gray (for emitter), Black (for receiver) The min. bending radius: R6 mm R0.236 in
4-core cable	For SF1‑N / NA40		* Please contact our office for wiring of adapter cables.	SF2B-CB05-B	Cable length: 0.5 m 1.640 ft Net weight: 95 g approx. (2 cables)	Used when replacing units in the SF1-N(discontinude mode) / NA40 series. The SF1-CC□ / NA40-CC□ cable with connector can be used without change, so that replacement with SF2B series units can be done smoothly. Two cables per set for emitter and receiver Cable outer diameter: ø6 mm ø0.236 in Connector outer diameter: ø14 mm ø0.551 in max. Cable color: Gray (for emitter), Gray with black line (for receiver) Connector color: Gray (for emitter), Black (for receiver) The min. bending radius: R6 mm R0.236 in

*Interchangeability function

This function is used for replacing other safety light curtains or area sensors with these new units. The bottom cap cables and sensor mounting brackets used will vary depending on the models being replaced. Refer to the instruction manual for details on actual wiring and mounting.

Models being replaced	Adapter cable	Adapter mounting bracket	Details of changes and points to note
SF2-A / SF2-N series (Discontinued product)	SF2B-CB05-A	MS-SF2B-5	・NPN output type: Connect the shielded wire to +V. PNP output type: Connect the shielded wire to 0 V. ・Existing SF2N-CC□ connection cables (optional) can be used without change. ・The interference prevention function (parallel connection) cannot be used.
SF1-N series (Discontinued product)	SF2B-CB05-B	When using the MS-SF1-1:MS-SF2B-4 For direct mounting: MS-SF2B-7	・Emitter: Synchronization cable has changed to interference prevention cable.(Note 1) Receiver: Synchronization cable has changed to control output (OSSD 1).(Note 2)(Note 3) ・Existing SF1-CC□A connection cables (optional) can be used without change. ・The beam axis alignment indicator of emitter cannot be used.
NA40 series	SF2B-CB05-B	When using the MS-NA40-1:MS-SF2B-4 For direct mounting: MS-SF2B-6	・Control output (OSSD 2) is equipped instead of self-diagnosis output.(Note 3) ・Emission halt function cannot be used. ・Existing NA40-CC□ connection cables (optional) can be used without change. ・The ambient temperature for the NA40-CC□ connection cables (optional) is –10 to +50 ℃ +14 to +122 ℉.

Notes:

1)	Not used in case of simple replacement of the SF1-N series (interference prevention wire is unused), therefore perform wire insulation so that it will not touch other wires.
2)	Not used in case of simple replacement of the SF1-N series (non-safety applications), therefore perform wire insulation so that it will not touch other wires.
3)	When used in safety applications, both OSSD1 and OSSD2 must be used.

[6]. Sub-sensor for series connection only

The sub-sensors for series connection are PNP / NPN types. Furthermore, they cannot simply be used by themselves. Always be sure to use them in combination with safety light curtains.

Hand protection type

Min. sensing object ø27 mm ø1.063 in (20 mm 0.787 in beam pitch)

Operating range (Note 1)	Model No. (Note 5)	Number of beam channels	Protective height (mm in)	Current consumption (Note 4)
0.2 to 13 m 0.656 to 42.651 ft [When using SF2B-CB05-B adapter cable at safety light curtain:0.2 to 5 m 0.656 to 16.404 ft]	SF2B-H8SL (Note 2)	8	168 6.614	Emitter: 20 mA or less Receiver: 25 mA or less
	SF2B-H12SL	12	232 9.134	Emitter: 20 mA or less Receiver: 25 mA or less
	SF2B-H16SL	16	312 12.283	Emitter: 20 mA or less Receiver: 35 mA or less
	SF2B-H20SL	20	392 15.433	Emitter: 20 mA or less Receiver: 35 mA or less
	SF2B-H24SL	24	472 18.583	Emitter: 30 mA or less Receiver: 45 mA or less
	SF2B-H28SL	28	552 21.732	Emitter: 30 mA or less Receiver: 45 mA or less
	SF2B-H32SL	32	632 24.882	Emitter: 30 mA or less Receiver: 55 mA or less
	SF2B-H36SL	36	712 28.031	Emitter: 30 mA or less Receiver: 55 mA or less
	SF2B-H40SL	40	792 31.181	Emitter: 40 mA or less Receiver: 65 mA or less
	SF2B-H48SL	48	952 37.480	Emitter: 40 mA or less Receiver: 65 mA or less
	SF2B-H56SL	56	1,112 43.779	Emitter: 45 mA or less Receiver: 85 mA or less
	SF2B-H64SL	64	1,272 50.079	Emitter: 45 mA or less Receiver: 85 mA or less
	SF2B-H72SL	72	1,432 56.378	Emitter: 50 mA or less Receiver: 105 mA or less
	SF2B-H80SL	80	1,592 62.677	Emitter: 50 mA or less Receiver: 105 mA or less
	SF2B-H88SL	88	1,752 68.976	Emitter: 60 mA or less Receiver: 125 mA or less
	SF2B-H96SL	96	1,912 75.275	Emitter: 60 mA or less Receiver: 125 mA or less

Arm / Foot protection type

Min. sensing object ø47 mm ø1.850 in (40 mm 1.575 in beam pitch)

Operating range (Note 1)	Model No. (Note 6)	Number of beam channels	Protective height (mm in)	Current consumption (Note 4)
0.2 to 13 m 0.656 to 42.651 ft [When using SF2B-CB05-B adapter cable at safety light curtain:0.2 to 5 m 0.656 to 16.404 ft]	SF2B-A4SL (Note 2)	4	168 6.614	Emitter: 15 mA or less Receiver: 20 mA or less
	SF2B-A6SL	6	232 9.134	Emitter: 15 mA or less Receiver: 20 mA or less
	SF2B-A8SL	8	312 12.283	Emitter: 15 mA or less Receiver: 25 mA or less
	SF2B-A10SL	10	392 15.433	Emitter: 15 mA or less Receiver: 25 mA or less
	SF2B-A12SL	12	472 18.583	Emitter: 20 mA or less Receiver: 30 mA or less
	SF2B-A14SL	14	552 21.732	Emitter: 20 mA or less Receiver: 30 mA or less
	SF2B-A16SL	16	632 24.882	Emitter: 20 mA or less Receiver: 35 mA or less
	SF2B-A18SL	18	712 28.031	Emitter: 20 mA or less Receiver: 35 mA or less
	SF2B-A20SL	20	792 31.181	Emitter: 25 mA or less Receiver: 40 mA or less
	SF2B-A24SL	24	952 37.480	Emitter: 25 mA or less Receiver: 40 mA or less
	SF2B-A28SL	28	1,112 43.779	Emitter: 25 mA or less Receiver: 50 mA or less
	SF2B-A32SL	32	1,272 50.079	Emitter: 25 mA or less Receiver: 50 mA or less
	SF2B-A36SL	36	1,432 56.378	Emitter: 30 mA or less Receiver: 60 mA or less
	SF2B-A40SL	40	1,592 62.677	Emitter: 30 mA or less Receiver: 60 mA or less
	SF2B-A44SL	44	1,752 68.976	Emitter: 35 mA or less Receiver: 70 mA or less
	SF2B-A48SL	48	1,912 75.275	Emitter: 35 mA or less Receiver: 70 mA or less

Note:

1)	The “operating range” is the possible setting distance between the emitter and the receiver.
2)	The SF2B-H8SL and SF2B-A4SL do not include a connector for series connection. Therefore, when connecting 3 sets in series, the sub-sensor can be used only for the third set.
3)	The distance between the tip of the safety light curtain and the top beam axis of the SF2B-H8SL and SF2B-A4SL is 22 mm 0.866 in.
4)	The specifications of the sub-sensor for series connection are the same as for the safety light curtain, except for the current consumption. However, the sub-sensor is not equipped with an output.
5)	Models which have an “E” symbol in the model No. on the name plate are emitters, and those with a “D” symbol are receivers.

Spare parts (Accessories for safety light curtain)

Designation	Appearance	Model No.	Description
Intermediate supporting bracket (Note)		MS-SF2B-2	Used to mount the safety light curtain on the intermediate position. Mounting is possible behind or at the side of the safety light curtain.
Test rod φ27		SF2B-TR27	Min. sensing object for regular checking (φ27 mm φ1.063 in), with hand protection type (min. sensing object φ27 mm φ1.063 in)

Note:	Depending on the product, the required set number will vary as follows. 1 set: SF2B-H□・・・Safety Light curtain with 40 to 56 beam channels, SF2B-A□・・・Safety Light curtain with 20 to 28 beam channels 2 sets: SF2B-H□・・・Safety Light curtain with 64 to 80 beam channels, SF2B-A□・・・Safety Light curtain with 32 to 40 beam channels 3 sets: SF2B-H□・・・Safety Light curtain with 88 to 96 beam channels, SF2B-A□・・・Safety Light curtain with 44 to 48 beam channels

Note:

Depending on the product, the required set number will vary as follows.
1 set: SF2B-H□・・・Safety Light curtain with 40 to 56 beam channels, SF2B-A□・・・Safety Light curtain with 20 to 28 beam channels
2 sets: SF2B-H□・・・Safety Light curtain with 64 to 80 beam channels, SF2B-A□・・・Safety Light curtain with 32 to 40 beam channels
3 sets: SF2B-H□・・・Safety Light curtain with 88 to 96 beam channels, SF2B-A□・・・Safety Light curtain with 44 to 48 beam channels

Intermediate supporting bracket

MS-SF2B-2

<In case of rear mounting>

<In case of side mounting>

Đánh giá

Chưa có đánh giá nào.

Safety Light Curtain Type 2 SF2B (Panasonic)